Resin Bond Diamond Grinding Discs/Laps For Gemstone

Description of resin bond diamond grinding disc/laps :

Instructions and maintenance for the resin bond lap: To get the best results, it is recommend 

to first cut the stone on a cutting disc of 600 or 1200 mesh. Polishing is acomplished with a 

constant drip of water by moving the stone across all the area of the lap, to obtain a brilliant 

flat surface. It is important to move the stone across the entire surface of the lap in order to 

maintain a smooth and flat polishing surface.

 Ideal for emeralds or any other stones that may be heat senstive. Effective for any kinds of 

gems except corundum. Works for stones in the 1-2 ct. size range.

The polishing powder is impregnated into the resin bond lap eliminating the need for any 

additional agents. All that is added is water. This long lasting lap with a polishing layer of 6mm, 

only requires dressing from time to time. Recommended operating speed is up to 1500 RPM.

When a light dressing is needed, a fine carborundum bar can be used to remove any ripples and

 to restore a perfect flat surface. Plenty of water is required while dressing.  

Application of resin bond diamond grinding discs/laps :

diamond millstone is mainly used for glass  polishing  and crystal polishing, like gemstone, quartz 

glass, agate etc .Resin bond diamond grinding discs are widely used for fine face grinidng in 

various industries.

Main features of resin bond diamond grinding disc/laps:

1. Efficient batch double and single side grinidng

2. High wear resistance and long working life

3. High parallelism and flatness of workpiece

4. Good surface quality

Specification of resin bond diamond grinding discs/laps:

Diameter :6″, 8″

Grit :60#, 80#, 100#, 180#, 260#, 360#, 600#, 1,200#, 3,000#

Configuration: without backing plates, with backing plates